The followings are the list of products for data acquisition products, please attach one photograph for each product category with brief description. 

■ I/O Connector Block with DIN-Rail Mounting
■ Two 37-pin D-sub connector (One for expansion)
■ Pin to Pin screw terminal for I/O connected
■ Pitch :  5.08 mm
■ Dimension : 148mm x 76mm

Multiport serial boards.
(CP-118U)

■ Over 700 Kbps data throughput, for top performance
■ Serial communication speed up to 921.6 Kbps
■ 128-byte FIFO and on-chip H/W, S/W flow control
■ Universal PCI compatible with 3.3/5V PCI and PCI-X
■ Various connection cable/box for RS-232/422/485
■ Windows 2003/XP/2000/98/ME, Linux, Unix driver support
■ Easy maintenance with on-board LED display and management software
■ Single 5 VDC power requirement
■ On-board 15 KV ESD protection

Serial to Ethernet converters.
(NPort 5210)

■ Make your serial devices Internet ready
■ Versatile socket operation modes, including TCP Server, TCP Client, UDP
■ Easy-to-use Windows Utility for mass installation
■ No bigger than a pack of cigarettes
■ Auto-detecting 10/100 Mbps Ethernet
■ Built-in 15 KV ESD protection for all serial signals
■ Supports SNMP MIB-II for network management

Industrial Ethernet switches.
(EDS-508)
Advanced Industrial Networking Capability

■ Redundant Fast Ethernet Ring Capability (recovery time < 300 ms at full load)
■ IGMP Snooping for filtering multicast traffic from industrial Ethernet Protocols
■ Supports IEEE 802.1Q VLAN and GVRP protocol to ease network planning
■ Supports QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
■ Port Trunking for optimum bandwidth utilization
■ SNMP V1/V2c/V3 for different levels of network management security

Designed for Industrial Applications
■ Bandwidth management prevents unpredictable network status
■ Lock port for authorized only MAC address access
■ Port mirroring for online debugging
■ Automatic warning by exception through email, relay output
■ Digital inputs to integrate sensors and alarms with IP networks
■ Automatic recovery of connected device's IP addresses
■ Line-swap fast recovery (Patented)
■ Redundant, dual DC power inputs
■ -40 to 75°C operating temperature range
■ IP 30, rugged high-strength case
■ Long-haul transmit distance of 40 km or 80 km
■ DIN-Rail or panel mounting ability
■ Configurable by Web browser, Telnet/Serial console, Windows utility
■ Send ping commands to identify network segment integrity

Recommended Software and Accessories
■ SNMP OPC Server Pro
■ DR-4524, DR-75-24, DR-120-24 DIN-Rail 24 VDC Power Supply Series

Media converters.
(TCF-142, IMC 21 SERIES)

■ “Ring” or “Point to Point” transmission
■ Convert RS-232/422/485 signal to fiber
■ ST Single-mode fiber with TCF-142-S
■ ST Multi-mode fiber with TCF-142-M
■ Extend RS-232/422/485 transmission distance
■ 20 km with Single mode—TCF-142-S
■ 2 km with Multi-mode—TCF-142-M
    Plug & Play
    Compact size
    Decrease signal interference
■ Supports baud rate up to 921.6 Kbps
■ Extended operating temperature from -40 to 75°C

USB to serial hubs.
(Uport 1650-16)

■ Supports high-speed USB 2.0, up to 480 Mbps
■ Serial transmission speed up to 921.6 Kbps
■ 128-byte FIFO and on-chip H/W, S/W flow control
■ Standard 19-inch rack-mountable
■ Built-in 15 KV ESD Protection
■ IP30-rated, rugged metal case
■ COM port assignments maintained across different PCs
■ Optional magnet accessories to attach on PC's case
■ Mini Female DB9 to Terminal Block for easy wiring
■ Supports both bus power and support external power

Picture grabber cards.
(IVC 100)

■ RS-232 to RS-422 conversion with RTS/CTS support
■ RS-232 to 2/4-wire RS-485 conversion
■ 2 KV Isolation Protection for both RS-422/485 signals and power (TCC-100I)
■ Wall and DIN-Rail mountable
■ Plug-in screw terminal Block for easy RS-422/485 wiring
■ PWR, Tx, and Rx LEDs
■ 16 KV ESD surge protection
■ Extended Operating Temperature range of -20 to 60°C