Specifications for A0750-13 (100V/7.5A)
Programmable Power Supply (RS232/485
Front view
Rare view
Input :180V to 264VAC, 50Hz, 1 Phase
Output As per customer`s requirement
1.
Line & Load Regulation
:
Limit : 0.1 % CV when measured on O/P Busbar/terminal block/studs.
2.
Ripple & Noise
:
Limit : 150mV P-P (pard)
(With shortest probe length and 0.1uF/63V parallel with 100uF electrolytic capacitor across the probe tip).
3.
Efficiency
:
80% when measured at nominal input and full load.
4.
I adj
:
Zero to full scale as per specification. adjust by rotary encoder on front panel.
5.
V adj
:
Zero to full scale as per specification. adjust by rotary encoder on front panel
6.
Over voltage
:
Over voltage adjust by rotary encoder on front panel .Factory set at above 110% of maximum output voltage.
7.
Voltage & Current Prog.
By External Pot.
:
For Voltage : 5K = Full scale
For Current : 5K = Full scale
8.
O/P V & I proportional O/p
:
For Voltage : 10V = Full scale
For Current : 10V = Full scale
9.
Remote Sense
:
Provided.
10.
Transient Recovery Time
:
(With local sense) 10mSec from 10% to 90% load change within 2% of set value.
11.
Indications
:
CV : Green LED
CC : Orange LED
Fault : Red LED
O/P ON/OFF : Red / Green (Duel colour LED)
Tx : Orange LED
Rx : Green LED
Remote/Local : Red / Green (Duel colour LED)
4 digit LCD display provided for function and monitor.
